11ax 1800Mbps Qualcomm Chipset Wave2.0 wall mount Wireless Access Point

11ax Wi-Fi6 standard, 2.4GHz+5GHz, 1800Mbps data rate
Multiple ports including Gigabit WAN(1), Gigabit LAN(4), pass-through RJ45 Port, Console Port and USB port
IEEE 802.3af PoE, work with PoE switch directly
Can be managed by AP controller and cloud server

Short Specification

FAP650 is an 11ax Wi-Fi standard Qualcomm Chipset wall mount Wireless Access Point with multiple ports and support MU-MIMO, Wave2.0, OFDMA and Seamless Roaming.


Combined 1800Mbps Wi-Fi speed over 2 radios: 2.4GHz (600Mbps 11ax 2*2) + 5GHz (1200Mbps 2*2), equipped Gigabit WAN & LAN ports, support MU-MIMO and DL/UL-OFDMA modulation, faster Ethernet data rate and more users, then multiple users can upload or download multiple packets at same time, narrower subcarrier spacing and longer symbol time, improved the stability and data processing efficiency, publicly to be used in high density access environment such as university campus, concert venue, gymnasium, etc.


Main Features:

Qualcomm 4-core enterprise CPU with more stable performance.


Wireless data rate up to 1.8Gbps. 802.11ax support 1024QAM, long OFDM symbol, 160M bandwidth and 11ax 2×2 MIMO technology, the wireless data rate up to 1.8Gbps, meet with demand of high-speed applications such as VR/ AR, 4K or 8K stream media.


Multiple Ports for multiple applications

There are 1*GE WAN port, 4*GE LAN ports, 1*pass-through RJ45 port, 1* console port, 1*USB2.0 charger port, easy to connect with IPTV, PC, smart home device, fit for multiple applications

1024-QAM Modulation Mode. 802.11ax adopt 1024-QAM modulation, which is more efficient than 802.11ac modulation, the throughput of single spatial traffic is increased by 25%.


DL/ UL MU-MIMO. 802.11ax support both downlink MU-MIMO and uplink MU-MIMO. It can communicate with multiple end users at the same time, greatly improving the user’s uplink transmission rate and the system’s uplink and downlink capacity, improving the efficiency of multi-user concurrent scenarios, reducing the terminal application latency.


TWT (Target Wake-up Time). 802.11ax support TWT, allowing devices to negotiate when need to wake up, send and receive data. In additional, wireless AP can group the device into different TWT cycles, increase sleep time, reduce the device competing after wake-up, and save the device power.


Coverage Improvement. 802.11ax support long OFDM symbol transmission mechanism and 2MHz narrowband transmission, effectively reduced the packet loss rate and noise interference, improve the receive sensitivity and increase the WiFi coverage.


Improvement of Anti-Interference Ability. 802.11ax support BSS color bit and dynamic CCA-SD (Clear Channel Assessment Signal Detection) threshold and power adjustment, effectively alleviates the channel interference in multi-users scenarios, improve the utilization of spectrum resources.







IPQ6000 +QCA8075+QCN5022+QCN5052




SPI NOR 8MB (1.8v) + NAND 128MB



2.4G Frequency

2.4GHz – 2.484GHz

2.4G Wi-Fi standard


5.8G Frequency


5.8G Wi-Fi Standard

802.11 a/n/ac/ax


1 * 10/100 /1000 RJ45 WAN Port, active PoE

4 * 10/100 /1000 RJ45 LAN Port

1 to 1 pass-through RJ45 Port

1 * Console Port

1 * USB2.0 port for power charge

1 * Reset button, press 10 seconds to revert to default setting


Build in 2dBi 2.4G MIMO antenna

Build in 3dBi 5.8G MIMO antenna

Data Rate


End Users


2.4G RF Power

≤ 20dBm

5.8G RF Power

≤ 19dBm




48V (IEEE 802.3af)

LED light

Sys, 2.4G Wi-Fi, 5.8G Wi-Fi, WAN, LAN*4  

Power Consumption

≤ 12W



Working Environment

Working Temperature: -30°C to 45°C;

Limited Temperature: -30°C to 55°C;

Storage Temperature: -40°C to 70°C;

Humidity:5%~95%(No condensation)




Firmware Information

Support OpenWRT firware based on QSDK driver;

Customer should develop their own firmware for it.

Scroll to Top

Get Free Quote