11ac 750Mbps dual band indoor access point support PoE,wireless router

11ac, dual band, 750Mbps data rate
2*10/100Mbps RJ45 ports, support 48V IEEE 802.3af PoE
High power design, can pass through 2 walls.
AP controller central managed
Model:A770

 

Main Features:

A770/A771 11ac Ceiling Wireless Access Points based on SNMP/CAPWAP Protocol, it is specifically designed to operate in Residential and commercial applications. Comply with IEEE 802.11ac/n/g/b standard, it is 2.4GHz and 5GHz dual radio, with data rate up to 733Mbps(300Mbps in 2.4G, 433Mbps in 5G), enable users to enjoy more stable and faster Ethernet surfing even access into 100+ end users; Tested 101 concurrent end users.

 

Equipped with Qualcomm Chipset, 500mW high RF Power and high gain 5dBi antenna, it is 4x WiFi Range than normal wireless router or wireless access points, tested in 6 hotel room WiFi Range.

 

Build in advanced WiFi channel analysis tool, adjustable RF Power, clients isolation, tag VLAN, it can applied in different environment with stable and safety performance.

Centralized managed by WLAN control, work with PoE switch, it is plug and play, Zero configuration in large quantity installation. What’s more, it can access into cloud server for remote management, advertisement and captive portal authentication like Facebook Login, Google Login, Member Login and SMS Login.

 

Applications

This high power, dual radio and high speed wireless access point can be deployed in a wide array of situations for both residential and commercial applications.

Residential Applications:

DC Power available, Adjustable RF Power based on room range; Then support Gateway operation mode, no need more wireless router; What’s more, support cloud server access for remote control, to provide effective wireless connectivity.

图片6

Commercial Applications:

Support PoE, High RF Power with  6 hotel room wifi range, 100+ end users, work as wireless AP and managed by WLAN Controller, A770/A771 public applied in hotel, school, shopping mall in mass installation.

图片5

Please note: in Connection Diagram 2, it support captive portal authentication like Google/Facebook/SMS/Member/WeChat log in.

The Guest Login page show as follow:

图片7

Specification

Wireless:

Standard

802.11ac/b/g/n, MIMO technology

Speed

433Mbps compatible with 5.8GHz

300Mbps b/g/n for 2.4GHz

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM

DSSS = DBPSK, DQPSK, CCK

Channel

Ch.1-13 for 2.4GHz

Ch.36-165 for 5.8GHz

Frequency band

2.412GHz-2.472 for 2.4GHz

5.180GHz-5.825Ghz for 5.8GHz

Wireless Security

64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption

RF Power:

RF Power

2.4G:  11n @MCS7:22±2DB,    @MCS0:24±2DB.

           11g @54M:23±2DB,     @6M:25±2DB.

           11b @11M:25±2DB,     @1M:27±2DB.

5.8G:  11a @54M:22±2DB,     @6M:24±2DB.

           11n @MCS7:20±2DB,    @MCS0:22±2DB.

           11ac @MCS9:19±2DB,   @MCS0:21±2DB.

Receive Sensitivity

2.4G:  11n: -70dbm@MCS7,   -88dbm@MCS0.

           11g: -72dbm@54Mbps, -88dbm@6Mbps.

           11b: -85dbm@11Mbps, -94dbm@1Mbps.

5.8G:  11a: -72dbm@54Mbps, -90dbm@6Mbps.

           11n: -70dbm@MCS7,  -90dbm@MCS0.

       11ac:-60dbm@MCS9,  -86dbm@MCS0.

EVM

 11n: ≤-28 DB

 11g: ≤-25 DB

 11b: ≤-10 DB

 11a: ≤-25 DB

Hardware:

Chipset

Qualcomm QCA9531 + QCA9887

Memory

128MB DDR2 RAM

Flash

16MB

Interface

1 * 10/100 Mbps RJ45 WAN Port

 

1 * 10/100Mbps RJ45 LAN Port

 

1 * Reset button, press 15 seconds to revert to default setting

Antenna

Build in 5dBi MIMO Antenna

Power consumption

PoE: A771: IEEE 802.3af, 15W(Full Load)

         A770: 24V Passive PoE, 12W

DC: 12V/1.5A

Software

Standard Version

Bandwidth: 20Mhz, 20/40Mhz, 80Mhz

Operation Mode

Gateway, Wireless AP, Repeater, WISP

SSID No

4 SSID for 2.4G, 4SSID for 5.8G

Factory Default Setting

Yes

Centralized Management by AC Controller

Yes

Firewall

DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding

Protocols

IPv4

Others:

Package Contents

750Mbps Dual Band wireless access point

Ethernet Cable                                             

Quick Installation Guide

Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Environment

Operating Temperature: -20~55 ℃

Storage Temperature: -40~70 ℃ (-40 ℉~158℉)
Operating Humidity: 10%~90% non-condensing;

Storage Humidity: 5%~90% non-condensing

Scroll to Top

Get Free Quote