11ac 2200Mbps tri-band WiFi access point, SMB access point with Qualcomm chipset

11ac, 2.4G+5.8G+5.8G, Qualcomm chipset, allow 200 users access
High power for more wireless range, suit for SMB WLAN solutions
Support PoE power supply, ESD, Surge protection
Model:AP760

Description:

AP760 is an 11ac Wi-Fi standard Qualcomm Chipset high power industrial Ceiling Wireless Access Point support MU-MIMO, Wave2.0 and Seamless Roaming.

Combined 2200Mbps Wi-Fi speed over 3 radios: 2.4GHz(400Mbps)+5GHz(900Mbps)+5GHz(900Mbps), equipped Gigabit WAN & LAN ports, fast Ethernet data rate make more than 200 end users can access into AP760 with faster Ethernet, make them to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks, widely be used in school, hospital, hotel, office, shipping mall…

 

High Power for more range and stable signal

Designed in Power Amplifier on PCB board, the power can be 300mW high power, 3dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply the stable Wi-Fi signal for users.

 

Metal Case, perfect heat dissipation to extend the working life

The bottom shell with metal material, improved the heat dissipation function, work as normal in -30°C to 70°C, can be installed in almost environment, and extend the device working life.

 

MU-MIMO, Wave2.0 Technology

Comply with Wave2.0 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams, greatly to improved the communication efficiency.

 

Beamfrorming, DFS, 5G Prior, Seamless Roaming, OFDM support

AP760 support many functions like Beamfrorming, DFS(Dynamic Frequency Selection), Airtime Fairness, Band Steering ( 5G Prior), 11kvr Seamless Roaming, OFDM(Orthogonal Frequency Division Multiplexing), RF Power adjustable to improve the performance and Wi-Fi stability.

 

Power over Ethernet and DC Power available

AP760 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. What’s more, it support DC input if need, So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

 

Access Controller System & Cloud Management System

With Access Control System, plug and play, zero configure the AP’s IP address, ESSID, Channel, Password, upgrade firmware, backup and restore….

What’s more, the AC controller with local authentication function, easy to do advertisement and captive portal authentication like Member/WeChat/SMS login.

Besides that, administrator can remote manage the AC controller or wireless AP at any place/time, simple and cost save in maintenance.

 

Main Features:

  • Comply with IEEE 802.11ac/b/g/n, tri-band, 2200Mbps Data Rate
  • With IPQ4019 CPU, 4 core, greatly improved the data processing performance.
  • 1*10/100/1000Mbps WANPort, 1*10/100/1000Mbps LAN Port, faster Ethernet.
  • With Skyworks power amplifier and FEM, 300mW high power, build in 3dBi MIMO antenna, stronger signal strength, more wireless coverage, 32M Flash, 512M DDR3RAM, more user, more stable
  • Support activeIEEE 802.3at 48V PoE standard
  • Support SSID broadcasting, Multi SSID up to 12(4 SSID in 2.4GHz, 8 SSID in 5GHz)
  • Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP multiple operation mode    
  • Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment

 

Working Diagram

图片5

Specification

 

Hardware:

Chipset

Qualcomm IPQ4019+QCA9886+QCA8075

Standard

802.11ac/b/g/n, MIMO technology

DDR3

512MB

Flash

32MB

2.4G Frequency

2.4GHz – 2.484GHz

2.4G Wi-Fi standard

802.11b/g/n

5.8G Frequency

IPQ4019: 5.150GHz~5320GHz; QCA9886: 5.500GHz!5.825GHz

5.8G Wi-Fi Standard

802.11 a/n/ac

Interface

1 * 10/100 /1000Mbps RJ45 WAN Port

1 * 10/100 / 1000Mbps RJ45 LAN Port

1 * Reset button, press 10 seconds to revert to default setting

Antenna

Build in 3dBi MIMO Antenna

Data Rate

2200Mbps

End Users

150+

RF Power

≤ 25dBm

DC

12V—-2A

PoE

48V (IEEE 802.3at)

LED light

Sys, WAN, LAN

Surge

Different Mode: ±2KV, Common Mode: ±4KV

ESD

±4KV

Max Power Consumption

≤ 24W

Size

198mm  * 198mm  * 41.02mm

Weight

Net weight: 786.7g

Firmware Features:

Operation mode

Wireless AP: Plug and Play.

Gateway: Dynamic IP/Static IP/PPPoE

Wi-Fi Repeater: Bridge exist wireless signal, then extend to more range.

WISP: For WLAN ISP, bridge ISP’s exist wireless signal, then dial-up to obtain Ethernet and extend more wireless range.

Wireless Functions

Multiple SSID functions: 2.4GHz: 4;  5.8GHz: 8

Support SSID hidden

Support seamless roaming, 802.11kvr standard.

Support 5G Prior for a faster Ethernet.

Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x

Support MAC filter

Support Wi-Fi time on/off to save energy

Support client isolation to improve the wireless stability

Support RF power adjustable, adjust the RF power based on environment.

Support user quantity limited, Max 64 users to access each band.

Networking Function

VLAN settings

Cloud access support in gateway mode

Device Management

Back-up the configuration

Restore the configuration

Reset to factory default

Reboot the device: including time reboot or reboot immediately

Admin management password modify

Firmware upgrade

System log

Support firmware GUI web management, AC controller management, remote management and cloud management

Protocols

IPv4

Others:

Package Contents

2200Mbps Dual Band wireless access point

Ethernet Cable                                             

Quick Installation Guide

Installation Accessory

Environment

Operating Temperature: -20~55 ℃

Limit working temperature: -30~70 ℃

Storage Temperature: -40~70 ℃

Humidity: 5%~95% non-condensing

 

Scroll to Top

Get Free Quote