11ac 1200Mbps Dual Band High Power Outdoor Base Station and Client

11ac, dual band, 1200Mbps data rate
High power with 18dBi antenna, 10KM long distance transmit for PTP/PTMP
Qualcomm industrial chipset, Gigabit WAN & LAN ports
IP65 water-proof, ESD and Surge Protection
Cloud access and management
Model:CPE2200

CPE2200, a high power outdoor WiFi bridge, comply with the next generation 802.11ac Wi-Fi standard, 2×2 MIMO technology, 2.4GHz and 5GHz dual band, 1200Mbps data rate, Gigabit WAN/LAN port; With water-proof case, high gain 14dBi WiFi antenna and PoE(Power over Ethernet), it is installed in outdoor environment to reach 3KM PTP/PTMP WiFi range, very good choice in long range data transmission or Wireless security. 

 

ABS weather-proof case
CPE2200 with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, rainy weather. Meantime, it adaptive to various environment, the working temperature can be at -40℃ to 55℃. Suit for any country.

 

High Power, High Gain Antenna, more WiFi Range 
Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, build in dual band panel WiFi antenna, the PTP/PTMP WiFi range more than 3KM.

 

Power over Ethernet
CPE2200 has integrated active Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB board.

 

Multiple Operation Mode
CPE2200 support wireless AP, Gateway, WISP, WiFi Repeater operation mode, max to meet with different operation request.

Hardware:

Chipset

Qualcomm QCA9563 + QCA9886 +QCA8334

Standard

802.11ac/b/g/n, MIMO technology

Memory

128MB DDR2 RAM

Flash

16MB

Interface

1 * 10/100/1000Mbps RJ45 WAN Port, WAN port support IEEE 802.3at standard PoE

1 * 10/100/1000Mbps RJ45 LAN Port

1 * Reset button, press 15 seconds to revert to default setting

Antenna

Build in Panel antenna, 12dBi in 2.4GHz, 14dBi in 5.8GHz

Power consumption

48V PoE<30W

Size

315mm * 145 mm * 80 mm

RF Data

 

 

Frequency

2.4G: 802.11b/g/n;   5GHz: 802.11a/n/ac

2.4GHz: 2.312GHz to 2.4835GHz

5GHz: 5.020 – 6.1000 GHz

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM

DSSS = DBPSK, DQPSK, CCK

Data Rate

1200Mbps (2.4G 300Mbps, 5.8G 900Mbps)

Receive Sensitivity & RF Power

RF Power

2.4G:  11n @MCS7:23±2DB,   @MCS0:25±2DB.

       11g @54M:24±2DB,     @6M:26±2DB.

       11b @11M:26±2DB,     @1M:28±2DB.

5.8G:  11a @54M:24±2DB,     @6M:26±2DB.

       11n @MCS7:22±2DB,    @MCS0:24±2DB.

       11ac @MCS9:21±2DB,   @MCS0:23±2DB.

Receive Sensitivity

2.4G:  11n: -70dbm@MCS7,    -88dbm@MCS0.

       11g: -72dbm@54Mbps,   -88dbm@6Mbps.

       11b: -85dbm@11Mbps,   -94dbm@1Mbps.

5.8G:  11a: -72dbm@54Mbps,   -90dbm@6Mbps.

       11n: -70dbm@MCS7,    -90dbm@MCS0.

       11ac:-60dbm@MCS9,   -86dbm@MCS0.

EVM

 11n: ≤-28 DB

 11g: ≤-25 DB

 11b: ≤-10 DB

 11a: ≤-25 DB

PPM

±20ppm

Max Users

128

Firmware Features:

Operation mode

Wireless AP, WiFi Repeater

WAN Type

Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)

Wireless Security

64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK, 802.1x encryption

SSID

Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)

Firewall

DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding

Protocols

IPv4

Others:

Package Contents

1200Mbps Dual Band wireless access point

Ethernet Cable                                            

Quick Installation Guide

Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Environment

Operating Temperature: -40~55 ℃,  Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing

Management

Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

Scroll to Top

Get Free Quote