MU-MIMO 11ac Dual Band 1200Mbps High Power Outdoor Base Station

IEEE802.11ac, 2.4G+5.8G dual band, 1200Mbps data rate
Qualcomm Industrial CPU with Gigabit WAN port
4*N type connector for more range detachable antenna;
Support PoE, IP65 water-proof level, ESD and Surge protection
Work with WLAN controller and Cloud Management System
Model: HW-AP80B

Description:

HW-AP80B is an Qualcomm Solution MU-MIMO 11ac high power industrial use Outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps), equipped Gigabit WAN port, fast Ethernet data rate make more than 100 end users can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.

 

Metal waterproof, dust proof and sunscreen shell, temperature adaptive

HW-AP80B with metal waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Meantime, it adaptive to various environment, the working temperature can be normal at -40℃ to 55℃. Suit for any country.

 

High Power design, N connector for external antenna, more range and stable signal

Designed in two line Power Amplifier on PCB board, the power can be 1000mW high power, 4PCS N connector,can connect with panel/omni antenna based on request, can greatly increase the Wi-Fi range and supply the stable Wi-Fi signal for users.

 

Wave 2 Technology

With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 4 Spatial Steams, greatly to improved the communication efficiency.

 

Power over Ethernet

HW-AP80B has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

 

Access Controller System & Cloud Management System

Work with WLAN controller in wireless AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore….

 

Then work with Cloud Management System, easy to do central and remote management, advertisement and multi authentication make this device more professional in Wi-Fi Projects.

 

Main Features:

  • Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
  • 1 10/100/1000Mbps WANPort,faster Ethernet.
  • 1000mW high power, can connect with external antenna forstronger signal strength and more wireless coverage, 16M Flash, 128M DDR2 RAM, more user, more stable.
  • Support IEEE 802.3at PoE standard.
  • Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz).
  • Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode.
  • With function of build in firewall, IP filter, URL filter and MAC filter 
  • Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in different environment.
  • Support DDNS, VPN pass through, Port forwarding and DMZ host.
  • Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security.

Product Spec.:

Hardware:

Chipset

Qualcomm QCA9563 + QCA9886 +QCA8334

Standard

802.11ac/b/g/n, MU-MIMO technology

Memory

128MB DDR2 RAM

Flash

16MB

Interface

1 * 10/100 /1000Mbps RJ45 WAN Port

1 * Reset button, press 15 seconds to revert to default setting

Antenna

4PCS N type antenna connector

Power consumption

48V PoE<30W

Weight

4KGS

RF Data

 

 

Frequency

2.4G: 802.11b/g/n;   5GHz: 802.11a/n/ac

2.4GHz: 2.312GHz to 2.4835GHz

5GHz: 5.020 – 6.1000 GHz

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM

DSSS = DBPSK, DQPSK, CCK

Throughput

1200 Mbps

2.4G RF Power

802.11b

11M

28±2dBm

1M

29±2dBm

802.11g

54M

27±2dBm

6M

29±2dBm

802.11n HT20

MCS7

26±2dBm

MCS0

28±2dBm

802.11n HT40

MCS7

25±2dBm

MCS0

27±2dBm

5G RF Power

802.11a

54M

23±2dBm

6M

25±2dBm

802.11n HT20

MCS7

22±2dBm

MCS0

24±2dBm

802.11n HT40

MCS7

21±2dBm

MCS0

24±2dBm

802.11ac HT80

MCS9

20±2dBm

MCS0

23±2dBm

2.4G Receive Sensitivity

802.11b

11M

-85dBm

1M

-94dBm

802.11g

54M

-72dBm

6M

-90dBm

802.11n HT20

MCS7

-70dBm

MCS0

-88dBm

802.11n HT40

MCS7

-68dBm

MCS0

-86dBm

5G Receive Sensitivity

802.11a

54M

-72dBm

6M

-90dBm

802.11n HT20  

MCS7

-70dBm

MCS0

-88dBm

802.11n HT40

MCS7

-68dBm

MCS0

-86dBm

802.11ac HT80

MCS9

-58dBm

MCS0

-85dBm

EVM

2.4G: 802.11b:≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28 dB

5G: 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB

PPM

±20ppm

Max Users

128+

Firmware Features:

Operation mode

Wireless AP, Gateway, WISP, Wi-Fi Repeater

WAN Type

Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)

Wireless Security

64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption

SSID

Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)

Firewall

DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding

Protocols

IPv4

Others:

Package Contents

1200Mbps Dual Band wireless access point

Ethernet Cable                                             

Quick Installation Guide

Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Environment

Operating Temperature: -40~50 ℃,  Storage Temperature: -40~70 ℃
Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing

Management

Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

Scroll to Top

Get Free Quote