5.8G 900Mbps Outdoor CPE with LED Display

Long distance transmit for PTP/PTMP
11ac 5.8GHz, 900Mbps wireless data rate
2*10/100Mbps WAN/LAN ports,
Simple setup by LED display and Switch on device;
Cloud access and management
Model:CPE200

CPE200 is a hot sell 11ac outdoor CPE with 900Mbps data rate. Comply with IEEE 802.11b/g/n/ac standard, with 12dBi dual polarized high gain antenna, the PTP/PTMP distance is more than 2000 meters.

It supports Wireless AP, Wireless Bridge operation mode for PTP/PTMP connections, with operation switch on device, easy to setup CPE200M’s operation mode, no need to access into GUI, avoid the complex setup program, then simple to view the connection status and signal strength by LED signal lights, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.

CPE200 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive also; Meantime, it supports 24V passive PoE, ESD protection and surge protection, ideal for outdoor use; 

Most Important, CPE200 support watchdog self-detection function, reboot and recover device automatically if some network attack. Besides that, it supports cloud remote management, administrator can monitor the working status, upgrade firmware, reboot, timed reboot device through cloud server, recover and maintain device at any time and any location, operator level outdoor PTP/PTMP connection equipment.

 

Main Features:

Solution for Indoor/ Outdoor Video Data Transmission.

 

5.8GHz High Speed with Long Outdoor PTP/PTMP Range.

 

Comply with new and latest 11ax technology, pure 5.8GHz band, 900Mbos data rate faster wireless speed with less Wi-Fi interference, signal more stable, widely be used in wireless security or long range PTP.PTMP connections.

 
Water-Proof Outdoor Shell.

 

Adopt outdoor ABS plastic shell, simple and elegant! Support professional lightning protection, IP65 water-proof, dust-proof, suit for multiple harsh environments. Even in extreme hot and cold environment (-40℃ – 70℃), also can work stably.

 

LED Display and Button Press to Bridge. With visible LED display to show host/ client mode/ signal strength/ IP address, then with H/ C button, press it to change the host/ client mode for quickly point to point and point to multi-point wireless connection, simple to install and degu, cost saving.

 

AP + Bridge operation mode, more stable. Support AP and bridge operation mode, simple to built the PTP/ PTMP connections, meet with multiple Wi-Fi transmission scheme demands.

 

Adjustable RF Power. The transmission RF power is adjustable based on environment. Cut down RF power in place with high density of people or wireless AP, or increase RF power in long range place to improve the performance.

 

Support Anti Surge. There are two RJ45 ports anti surge, allow more users access in safety mode.

 

Outdoor Water-Proof/ Surge protection/ Long Range Distance. With high gain antenna, the PTP/PTMP distance up to 2KM.

 

Application scenario of building wireless transmission. With AP and client operation mode, easy to achieve PTP/PTMP wireless connection, meet with long range wireless transmission in buildings, factories, rural areas, squares…

Hardware:

Chipset

MT7628DAN +MT7613AE

Standard

802.11a/n/ac

Flash

8MB

DDR3L

64MB

2.4G Frequency

5.150GHz – 5.850GHz

Interface

1 * 10/100 RJ45 WAN Port

1 * 10/100 RJ45 LAN Port

1 * Reset Button

1 * S/ M Switch

2 * Function Buttons

Antenna

Built-in 12 dBi directional antenna

Data Rate

900Mbps

End Users

50+

5G RF Power

≤ 19dBm

PPM

±20ppm

PoE

24V Passive POE

LED light

Sys, WAN, LAN

Power Consumption

≤ 8W

ESD Protection Standard

Contact Discharge: ±6KV; Air Discharge: ±8KV

Surge Protection Standard

Common mode: ±2KV, Differential mode ±1KV

Size

168*88*57.6MM

Weight

0.5KG

Others:

Environment

Operating Temperature: -30~55 ℃

Limit working temperature: -40~70 ℃

Storage Temperature: -40~70 ℃

Humidity: 5%~95% non-condensing

Scroll to Top

Get Free Quote