300Mbps high power Ceiling Wireless Access Point,hotel wireless AP

IEEE 802.11n standard, 2.4GHz with 300Mbps data rate
Qualcomm QCA9531 chipset, allow 60+ users access
High power design with high gain antenna, more wireless range
Central managed by the WLAN controller
Model:A930H

Short Specification

A930H is a 300Mbps high power Ceiling Wireless Access Point with Qualcomm QCA9531 Chipset. Comply with IEEE 802.11b/g/n standard, 300Mbps data rate, with MIMO omni antenna inside, 500mW high RF power together with IEEE 802.3af PoE, easy to set up in different environment.

 

Ceiling Mount case, Hardware with Qualcomm chipset, 16M Flash, 128M DDR2, firmware work with AC controller for central management and captive portal authentication function, it designed specifically for business-class environments such as hotels, airports, coffee shops, shopping centers, sporting venues, and university campus.

 

Main Features:

First Option for Small-Medium Environment Wireless Networking.

图片8

Qualcomm Enterprise Wireless Solution.

图片9

High performance, Core components are all from Famous Manufacturers.

图片10

More Wi-Fi Coverage. PCB board adopt Skyworks POWER Amplifier and Low Noise Amplifier design, improved the wireless coverage and reduced the noise interference.

图片11

Adjustable RF Power, Improve Wireless Quality. The transmission RF power is adjustable based on environment, Cut down RF power in place with high density of people or wireless AP to reduce Wi-Fi interference; Increase RF power in large area to improve the signal strength.

图片12

Seamless Roaming, no loss in Wi-Fi connection. End users will connect the wireless AP with stronger wireless signal to achieve the seamless roaming.

图片13

Higher Performance. 300Mbps data rate, 50 end users max, 40+ simultaneous end users tested.

图片14

Specification

Chipset

QCA9531

Standard

802.11b/g/n, MIMO technology

Flash

16MB

DDR3L

128MB

2.4G Frequency

2.4GHz – 2.484GHz

2.4G Wi-Fi standard

802.11b/g/n

Interface

1 * 10/100 RJ45 WAN Port

1 * 10/100 RJ45 LAN Port

1 * Reset button, press 10 seconds to revert to default setting

Antenna

Build in 2*4dBi 2.4G MIMO Antenna

Data Rate

300Mbps

End Users

50+

2.4G RF Power

≤ 27dBm

PPM

±20ppm

DC

12V—-1A

PoE

48V (IEEE 802.3af)

LED light

Sys, WAN, LAN

Power Consumption

≤ 10W

Size

188*188*50mm

 

Firmware Specification

Working Mode

Gateway, AP, Repeater, WISP

Wireless Functions

Multiple SSID functions: 2.4GHz: 4

Support SSID hidden

Support seamless roaming, 802.11kvr standard.

Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x

Support MAC filter

Support Wi-Fi time on/off to save energy

Support client isolation to improve the wireless stability

Support RF power adjustable, adjust the RF power based on environment.

Support user quantity limited, Max 50 users to access each band.

Networking Function

VLAN settings

Cloud access support in gateway mode

Device Management

Back-up the configuration

Restore the configuration

Reset to factory default

Reboot the device: including time reboot or reboot immediately

Admin management password modify

Firmware upgrade

System log

Support firmware GUI web management, AC controller management, remote management and cloud management

Protocols

IPv4

 

Antenna Specification

Frequency Range

2.4GHz

Impedance

50 Ohms nominal

Gain

4dBi

Radiation

Omni

Polarization

Vertical

Scroll to Top

Get Free Quote