2.4GHz 300Mbps Outdoor WiFi Access Point with inner antenna

Qualcomm QCA9531 high performance chipset
High power design with more wireless range
Support passive PoE/IEEE 802.3af PoE
ABS waterproof, dustproof and sunscreen shell
Model:AP80Q-P24

Description:

AP80Q is an 300Mbps high power outdoor CPE/AP with omni antenna; It Comply with IEEE 802.11b/g/n standard, adopt QCA9531 chipset, 16MB flash,64MB SDRAM, 5dBi omni antenna, 500mW high power, more than 200 meters Wi-Fi range, good choice for outdoor Wi-Fi signal coverage.

With AP, Router and Wi-Fi Repeater operation mode, it can transmit Wi-Fi signal in a certain place for outdoor users, or can bridge the exist Wi-Fi signal to extend the range.

AP80 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive and board protective,suit for outdoor Wi-Fi networking projects.

Meantime, it support Power over Ethernet, support passive PoE/IEEE 802.3af PoE, easy in setup even no power socket nearby. With LED light show signal strength, easy to find a suitable place for outdoor CPE, save much human work and cost.

What’s more, AP80 support multi SSID(up to 4), each SSID comply with IEEE 802.1Q VLAN, then AP80 work with our AC controller, easy to be configure and setup centrally, what’s more, it support Portal Certificate, easy to do ads for users.

 

Main Features:

  • Professional outdoor shell design,IP65 dust proof/water proof level. Adopt ABS outdoor engineering plastic shell and industrial components,to provide IP65 level water proof ,dust proof and lightning protection,adapt to wind,sun,thunderstorm,snow and freeze or other adverse environments,even in extreme high and low temperature(-40℃ –  +70℃)environment,can work normally and steadily as well.
  • With Qualcomm QCA9531 chipset , Flash8MB .DDR  64MB, greatly improved the data processing performance and allow more end users access.
  • Independent external power amplifier circuit and low noise amplifier receiving circuit design.
  • Long wireless coverage ,transfer all kinds of data smoothly ,do not have any latency. AP80Q is a high power  outdoor base station with 160 meters wireless range ,can meet the demands for outdoor wifi project large area coverage , specialize in high power design ,can ensure strong wireless signal and stable performance.
  • RF power is adjustable according to the actual use environment .Reduce mutual WIFI interference between each other to improve wireless stability.
  • Multiple operation mode to meet the different wireless solutions .

Hardware Spec:

Hardware:

 

Chipset

QCA9531 580MHZ

 

Wireless

802.11N, 2T2R  300M  MIMO Technology

 

Memory

64MB DDR2 RAM

 

Flash

16MB

 

Interface

2 10/100 Mbps RJ45 Port, support 12~48V PoE

 

1 Reset Button

 

1 DC Jack, 12V Power Supply

 

Antenna

5dBi omni Antenna

 

IP Level

IP65

 

LED Light

POWER  WIFI WAN LAN  S1(GPIO9) S2(GPIO14) S3(GPIO11) S4(GPIO12)

 

Size

L 257mm , W: 87mm, H: 38 mm

 

Power

12V(POE 24V/48V)/1A;110V/220V

 

RF Data

 

RF Data

802.11b/g/n:

 

2.4~2.4835GHz

 

Korea, Japan, ETSI, FCC

 

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM

 

DSSS = DBPSK, DQPSK, CCK

 

Data Rate

300 Mbps

 

RF Output Power

<29dBm

 

Firmware

 

Operation Mode

Gateway/AP/WiFi Repeater

 

Protocol/Standard

IEEE 802.3(Ethernet)

 

IEEE 802.3u(Fast Ethernet)

 

IEEE 802.11b/g/n(2.4G WLAN)

 

Wireless

Auto-Channel selection

 

Distance Control (802.1x Ack timeout)

 

Multiple SSID (4 SSID)

 

BSSID

 

Security

WEP Encryption-64/128/152 bit

 

WPA/WPA2 Personal (WPA-PSK using TKIP or AES)

 

WPA/WPA2 Enterprise (WPA-EAP using TKIP)

 

Hide SSID

 
 

System Setting

Web-based configuration (HTTP/Telnet)

 

Firmware upgrade

Upgrade firmware via web browser or TFTP

 

Administration

Admin Password can be configured

 

System monitoring

Status in hand , useful statistic and Event log

 

Log

Supports local logs, logs host, logs file export

 

Reset

Reset or factory defaults

 

Backup

Restore settings & configuration of the device to local file

 

Physical Property

 

 

 

Temperature

Working: 0°C~55°C

 

 

Storage: -20°C to 70°C

 

Humidity

5%~95% (typical)

 

Scroll to Top

Get Free Quote