11AC Tri-Band 2200Mbps Industrial Use Outdoor Access Point

IEEE 802.11ac standard, 2.4G+5.8G+5.8G tri-band, 2200Mbps data rate;
Qualcomm IPQ4019 chipset, Gigabit WAN port support IEEE 802.3at PoE standard
High power, N type connector, detachable antenna for more range and applications
Work with AP controller and cloud server for central and remote management
Model: HW-AP2200

Description:

HW-AP2200 is an Qualcomm Solution 11ac high power industrial use Outdoor access point with tri-band,  2200Mbps Wi-Fi speed (2.4GHz 300Mbps, 5.8GHz 900Mbps, 5.8G 900Mbps), equipped with Gigabit WAN port, fast Ethernet data rate make 200 end users access into it, to enjoy the seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks, useful in high density user access environment.

Outdoor shell with Lightning Protection, Temperature Adaptive

HW-AP2200 with metal IP67 level waterproof, dust proof and sunscreen shell, PCB board support Common mode ±6KV Different mode ±2KV lightning protection, which avoid the damage from dust, thunderstorm weather. Meantime, it adaptive to various environment, the working temperature can be normal at -30℃ to 70℃, Suit for any country and any environment.

High Power design, N connector for external antenna, more range and stable signal

Designed in Power Amplifier on PCB board, the power can be 300mW high power, N type water proof connector,can connect with panel/omni outdoor antenna based on request, greatly increase the Wi-Fi range and supply the stable Wi-Fi signal for users.

Power over Ethernet

HW-AP2200 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

MU-MIMO, Wave2.0 Technology

Comply with Wave2.0 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams, greatly to improved the communication efficiency.

Beamfrorming, DFS, Airtime Fairness, Band Steering, OFDM support

HW-AP2200 support many functions like Beamfrorming, DFS(Dynamic Frequency Selection), Airtime Fairness, Band Steering ( 5G Prior), OFDM(Orthogonal Frequency Division Multiplexing), RF Power adjustable to improve the performance and Wi-Fi stability.

WLAN Controller Central/Remote Management, Captive Portal support

Work with WLAN controller in wireless AP operation mode, easily realize the central and remote management, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore….

Besides that, it support captive portal authentication like Member/SMS/no authentication login, make this device more professional in Wi-Fi Projects.

 

Main Features:

  • Comply with IEEE 802.11ac/b/g/n, tri-band, 2200Mbps Data Rate.
  • 1*10/100/1000Mbps WAN Port, PoE support, water-proof.
  • 300mW high power, can connect with external antenna forstronger signal strength and more wireless coverage, 32M Flash, 512M DDR3 RAM, more user, more stable.
  • Support IEEE 802.3at PoE standard.
  • Support SSID broadcasting, Multi SSID up to 12 (4 SSID in 2.4GHz, 8 SSID in 5GHz).
  • Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode. 
  • Support DDNS, VPN pass through, Port forwarding and DMZ host.

 

HWAP-2200新壳英文_01HWAP-2200新壳英文_02HWAP-2200新壳英文_03HWAP-2200新壳英文_04HWAP-2200新壳英文_05HWAP-2200新壳英文_06HWAP-2200新壳英文_07HWAP-2200新壳英文_08HWAP-2200新壳英文_09HWAP-2200新壳英文_10

Product Spec.:

Hardware:

Chipset

Qualcomm IPQ4019+QCA9886+QCA8075

Standard

802.11ac/b/g/n, MU-MIMO technology

Memory

512MB DDR3 RAM

Flash

32MB

Interface

1 * 10/100 /1000Mbps RJ45 WAN Port

1 * 10/100 / 1000Mbps RJ45 LAN Port (Inside of shell)

1 * Reset button, press 10 seconds to revert to default setting

Antenna

4 * N type connector, can work with omni/panel antennas

Power consumption

48V PoE<30W

Size

 

RF Data

 

 

Frequency

2.4G: 802.11b/g/n: 2.4GHz – 2.484GHz

5GHz:802.11a/n/ac MIMO: 5.150GHz~5.850GHz

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM

DSSS = DBPSK, DQPSK, CCK

Throughput

2200Mbps

2.4G Receive Sensitivity

802.11b

11M

-85dBm

1M

-94dBm

802.11g

54M

-72dBm

6M

-90dBm

802.11n HT20

MCS7

-70dBm

MCS0

-88dBm

802.11n HT40

MCS7

-68dBm

MCS0

-86dBm

5G Receive Sensitivity

802.11a

54M

-72dBm

6M

-90dBm

802.11n HT20  

MCS7

-70dBm

MCS0

-88dBm

802.11n HT40

MCS7

-68dBm

MCS0

-86dBm

802.11ac HT80

MCS9

-58dBm

MCS0

-85dBm

EVM

2.4G EVM: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28dB

5G EVM: 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB

PPM

±20ppm

Max Users

200

Firmware Features:

Operation mode

Wireless AP, Gateway, WISP, Wi-Fi Repeater

WAN Type

Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)

Wireless Security

64/128-bit WPA / WPA2(PSK/AES) encryption

SSID

Multiple SSID (4 SSID for 2.4G, 8 SSID for 5.8G)

Firewall

IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding

Protocols

IPv4

Others:

Package Contents

2200Mbps Dual Band wireless access point

Ethernet Cable                                             

Quick Installation Guide

Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Environment

Operating Temperature: -20~55 ℃

Limit working temperature: -30~70 ℃

Storage Temperature: -40~70 ℃

Humidity: 5%~95% non-condensing

Management

Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

 

Scroll to Top

Get Free Quote