Select a Country or Region

1
4
3
2
5
1
4
3
2
5

11ac 1200Mbps dual band Wave2 Ceiling wireless access point,wireless router

  • Wave2 Ceiling wireless access point
  • wireless access point
  • wireless router
  • Model:XD4200

Description:

XD4200 is an 11ac Wi-Fi standard Qualcomm Chipset high power industrial Ceiling Wireless Access Point support Wave2 , combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps), equipped Gigabit WAN & LAN port, fast Ethernet data rate make more than 100 end users can access into XD4200 with faster Ethernet, make them to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks, widely be used in school, hospital, hotel, office, shipping mall...

 

High Power for more range and stable signal

Designed in two line Power Amplifier on PCB board, the power can be 1000mW high power, 5dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply the stable Wi-Fi signal for users.

 

Wave 2 Technology

With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 4 Spatial Steams, greatly to improved the communication efficiency.

 

Power over Ethernet

XD4200 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

 

Access Controller System & Cloud Management System

With Access Control System, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....

 

Then work with Cloud Management System, easy to do central and remote management, advertisement and multiple captive portal authentication make this AP more professional in Wi-Fi Projects.

Main Features:

  • Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
  • 1 10/100/1000Mbps WANPort, 1 10/100/1000Mbps LAN Port, faster Ethernet.
  • 1000mW high power, build in 5dBi MIMO antenna, stronger signal strength, more wireless coverage, 16M Flash, 128M DDR2 RAM, more user, more stable
  • Support activeIEEE 802.3at 48V PoE standard
  • Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz)
  • Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode
  • With function of build in firewall, IP filter, URL filter and MAC filter      
  • Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
  • Support DDNS, VPN pass through, Port forwarding and DMZ host
  • Support 64/128-bit WEP security,EAP, 128bit WPA (TKIP/AES) security

 

Working Diagram

 

图片5

Specification

Hardware:

Chipset

Qualcomm QCA9563 + QCA9886 +QCA8334

Standard

802.11ac/b/g/n, MIMO technology

Memory

128MB DDR2 RAM

Flash

16MB

Interface

1 * 10/100 /1000Mbps RJ45 WAN Port

1 * 10/100 / 1000Mbps RJ45 LAN Port

1 * Reset button, press 15 seconds to revert to default setting

Antenna

Build in 5dBi MIMO Antenna

Power consumption

48V PoE<30W

Size

198mm X 28mm

Weight

 

RF Data

 

Frequency

2.4G:802.11b/g/n: 2.4GHz – 2.484GHz,

5GHz:802.11a/n/ac: 5.150GHz~5.850GHz

Country code

FCC、IC、ETSI、MKK、MKK1、MKK2、MKK3、NCC、RUSSIAN、CN

Modulation

OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM

DSSS = DBPSK, DQPSK, CCK

Throughput

1200Mbps

2.4G RF Power

802.11b

11M

28±2dBm

1M

29±2dBm

802.11g

54M

27±2dBm

6M

29±2dBm

802.11n HT20

MCS7

26±2dBm

MCS0

28±2dBm

802.11n HT40

MCS7

25±2dBm

MCS0

27±2dBm

5G RF Power

802.11a

54M

23±2dBm

6M

25±2dBm

802.11n HT20

MCS7

22±2dBm

MCS0

24±2dBm

802.11n HT40

MCS7

21±2dBm

MCS0

24±2dBm

802.11ac HT80

MCS9

20±2dBm

MCS0

23±2dBm

2.4G Receive Sensitivity

802.11b

11M

-85dBm

1M

-94dBm

802.11g

54M

-72dBm

6M

-90dBm

802.11n HT20

MCS7

-70dBm

MCS0

-88dBm

802.11n HT40

MCS7

-68dBm

MCS0

-86dBm

5G Receive Sensitivity

802.11a

54M

-72dBm

6M

-90dBm

802.11n HT20  

MCS7

-70dBm

MCS0 .

-88dBm

802.11n HT40

MCS7

-68dBm

MCS0 .

-86dBm

802.11ac HT80

MCS9

-58dBm

MCS0 .

-85dBm

EVM

2.4G: 802.11b:≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28 dB

5G: 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB

PPM

±20ppm

Max Users

128+

Firmware Features:

Operation mode

Wireless AP, Gateway, WISP, WiFi Repeater

WAN Type

Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)

Wireless Security

64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption

SSID

Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)

Firewall

DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding

Protocols

IPv4

Others:

Package Contents

1200Mbps Dual Band wireless access point

Ethernet Cable                                             

Quick Installation Guide

Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Environment

Operating Temperature: -30~55 ℃

Storage Temperature: -40~70 ℃

Humidity: 5%~95% non-condensing

Management

Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

 

Contact US

Shenzhen Yunlink Technolgoy Co., LTD

+86-13760492976
A9 Floor, 12th Building, Taihua Wutong island, Hangkong Road, Gushu, Xixiang, Bao’an District, Shenzhen 518126, P.R.C.
Factory Address: B3 Building, An'le Industrial Zone, Hangcheng Road, Gushu, Xixiang Town, Baoan District, Shenzhen, China

Free Quote